3 thoughts on “What is a special type of coke plant?”
Roland
The coking push car driver and tar -pipe -type furnace of the coking plant metallurgical industry belong to the special types of special work. Legal analysis If traffic is far lower than the minimum traffic that guarantees accuracy, it will cause no output (such as the vortex flow meter) or the output signal to be removed as a small signal (such as differential pressure flow flows. ), This is not good for the suppliers, and there is no fairness. In order to prevent the loss of benefits, for a specific set of thermal energy measurement equipment, the supply and demand parties often agree that a certain amount of value is “agreed on the lower limit flow” based on the range of traffic measurement and the range that can be achieved, and it is agreed that if the actual traffic is less than the agreed value, , Charge at the lower limit charging traffic. The measurement administrative departments of the people’s governments at or above the county level may set up a measurement and verification agency as needed, or authorize the measurement and verification agencies of other units to perform compulsory verification and other verification and test tasks. Those who perform the testing and test tasks stipulated in the preceding paragraph must pass the assessment. This function is usually implemented in the flow display instrument. According to the needs of the region, the measures of the local people’s governments at or above the county level established a public measurement standard appliance for social public measurement, and they were used after the assessment of the administrative department of the higher -level people’s governments. According to the needs, enterprises and institutions can establish the measurement standard appliances used by the unit. The highest measurement standard equipment is used by the relevant people’s governments to pass the assessment and use it. The measurement and verification work should be carried out near the place in accordance with the principles of economic reasonable. The measurement test must be performed in accordance with the national measurement and verification system table. The national measurement and testing system table is formulated by the State Council’s measurement administrative department. The legal basis “Professional Disease Prevention and Control Law of the People’s Republic of China” It 22 The employer must adopt effective occupational disease protection facilities and provide workers with occupational disease protective supplies for personal use. Occupational disease protective supplies provided by employers for workers must meet the requirements of preventing and control occupational diseases; if they do not meet the requirements, they shall not be used. It 23 The employer shall give priority to the use of new technologies, new processes, new equipment, and new materials that are conducive to preventing occupational diseases and protecting the health of workers, and gradually replace technologies, crafts, equipment, and materials that are severely harmful to occupational diseases. Ir’s employers who generate occupational disease hazards shall set up a bulletin board in an eye -catching location to announce the rules and regulations on the prevention and control of occupational diseases.
There are five types of work in the coking industry.
For example: push car driver, tar -oil pipe furnace worker, coal tar to distillate the washing worker, etc.
is a special type of work. It should be approved by the Ministry of Labor before 1993 and the special type of work set by the competent department of your industry. It belongs to special work.
“You Ziyi”: 缀 野 《《《《《, Chu Chu fallen leaves Wanpan crow. Dongtian is difficult to keep the tourism, and the first line of love is the end of the world.
The coking push car driver and tar -pipe -type furnace of the coking plant metallurgical industry belong to the special types of special work.
Legal analysis
If traffic is far lower than the minimum traffic that guarantees accuracy, it will cause no output (such as the vortex flow meter) or the output signal to be removed as a small signal (such as differential pressure flow flows. ), This is not good for the suppliers, and there is no fairness. In order to prevent the loss of benefits, for a specific set of thermal energy measurement equipment, the supply and demand parties often agree that a certain amount of value is “agreed on the lower limit flow” based on the range of traffic measurement and the range that can be achieved, and it is agreed that if the actual traffic is less than the agreed value, , Charge at the lower limit charging traffic. The measurement administrative departments of the people’s governments at or above the county level may set up a measurement and verification agency as needed, or authorize the measurement and verification agencies of other units to perform compulsory verification and other verification and test tasks. Those who perform the testing and test tasks stipulated in the preceding paragraph must pass the assessment. This function is usually implemented in the flow display instrument. According to the needs of the region, the measures of the local people’s governments at or above the county level established a public measurement standard appliance for social public measurement, and they were used after the assessment of the administrative department of the higher -level people’s governments. According to the needs, enterprises and institutions can establish the measurement standard appliances used by the unit. The highest measurement standard equipment is used by the relevant people’s governments to pass the assessment and use it. The measurement and verification work should be carried out near the place in accordance with the principles of economic reasonable. The measurement test must be performed in accordance with the national measurement and verification system table. The national measurement and testing system table is formulated by the State Council’s measurement administrative department.
The legal basis
“Professional Disease Prevention and Control Law of the People’s Republic of China”
It 22 The employer must adopt effective occupational disease protection facilities and provide workers with occupational disease protective supplies for personal use. Occupational disease protective supplies provided by employers for workers must meet the requirements of preventing and control occupational diseases; if they do not meet the requirements, they shall not be used.
It 23 The employer shall give priority to the use of new technologies, new processes, new equipment, and new materials that are conducive to preventing occupational diseases and protecting the health of workers, and gradually replace technologies, crafts, equipment, and materials that are severely harmful to occupational diseases.
Ir’s employers who generate occupational disease hazards shall set up a bulletin board in an eye -catching location to announce the rules and regulations on the prevention and control of occupational diseases.
There are five types of work in the coking industry.
For example: push car driver, tar -oil pipe furnace worker, coal tar to distillate the washing worker, etc.
is a special type of work. It should be approved by the Ministry of Labor before 1993 and the special type of work set by the competent department of your industry. It belongs to special work.
“You Ziyi”: 缀 野 《《《《《, Chu Chu fallen leaves Wanpan crow. Dongtian is difficult to keep the tourism, and the first line of love is the end of the world.